PRODUCT DETAILS

Product introduction

HDPE rough surface geomembrane is a new type of seepage control material, single rough surface, double rough surface and other HDPE geomembrane has the function of increasing the coefficient of friction, anti-slip and so on, which can be applied to vertical seepage control of steep slopes and improve the stability of the project. Rough surface improves the friction performance of geomembrane surface, at the same time, compared with the same specification glossy membrane, rough surface of the membrane, when laying the membrane, it will make the membrane and the substrate to form a small clamping level, which can enhance the membrane's resistance to bearing deformation, - generally used in the slopes require a larger coefficient of friction in the project.

Performance characteristics

It has excellent temperature adaptability, weldability, weather resistance, good aging resistance, chemical resistance and environmental stress cracking resistance.

Purpose of action

Mainly used in landfill, sewage waste liquid treatment, water conservancy, mining engineering or waste residue treatment site as anti-seepage material. treatment site as anti-seepage material.

Construction technology

HDPE rough geomembrane is mainly used for slopes, its main function is anti-slip, paving should be rolled from top to bottom, the lap width between neighboring membranes is about 15cm. The width of the lap between neighboring membranes is about 15cm, and it is welded by automatic crawler welding machine.

Technical indicators
Environmental protection with brown high-density polyethylene geomembrane <GB/T 17643-2011 GH-2T1. GH-2T2 type technical indicators>.

Thicknesses mm	0.75	1.00	1.25	1.50	2.00	2.50	3.00
Densities g/cm³	≥ 0.940
Roughness height	≥0.25
Tensile yield strength (longitudinal and transverse) N/mm	≥11	≥15	≥18	≥22	≥29	≥37	≥44
Tensile breaking strength (longitudinal and transverse) N/mm	≥8	≥10	≥13	≥16	≥21	≥26	≥32
Yield elongation (longitudinal and transverse) %	≥12
Elongation at break (longitudinal and transverse) %	≥100
Right angle tearing load (longitudinal and transverse) N	≥93	≥125	≥160	≥190	≥250	≥315	≥375
puncture strength N	≥ 200	≥ 270	≥335	≥400	≥ 535	≥670	≥800
Stress cracking under tensile load	≥300
Carbon black content %	2.0-3.0
Carbon Black Dispersibility	No more than 1 out of 10 data at level 3, not allowed at levels 4 and 5
Atmospheric pressure oxidation induction time (OIT)min	Atmospheric pressure oxidation induction time ≥ 100
Atmospheric pressure oxidation induction time (OIT)min	High pressure oxidation induction time ≥ 400
85°C heat aging %	≥55
anti-ultraviolet	≥ 50

PACKING AND DELIVERY

At present, our products are exported to Southeast Asia, Africa, the Middle East, South America and other 50 countries and regions, looking forward to cooperating with you!

CONSTRUCTION CASES

Construction Cases

FACTORY WORKSHOP

Geo-membrane blown film equipment

Geotextile Equipment

Quality Inspection

Geotextile Equipment

Workshop Equipment

Geo-membrane blown film equipment

FAQ

Q: How is the product packaged?

A: Standard export seaworthy packing with waterproof paper inside and iron outside, secured by fumigated wooden pallets. It can effectively protect products from corrosion and various climate changes during Marine transportation.

Q: Is there quality inspection before loading?

A: Of course, all our products go through strict quality inspection before packing. Those that fail will be destroyed. Customers can also entrust a third party to inspect the products before loading.

Q: What are the loading ports?

A: In general, we ship the goods from Shanghai, Tianjin, Qingdao and Ningbo ports. You can designate other ports according to your needs.

Q:Can you deliver the goods on time?

A: Yes, we guarantee the best quality products and punctual delivery. Integrity is the tenet of our company.

Q: Can we take some samples? Any fees?

A: Yes, we can provide samples free of charge, but we don't pay for shipping. If you place an order after confirming the sample, we will refund your delivery fee or deduct it from the order amount.

How can we guarantee quality?

Always a pre-production sample before mass production;</br>
Always final Inspection before shipment;</br>
Please feel free to leave us message if you have any question about us and our products.

Always a pre-production sample before mass production;
Always final Inspection before shipment;
Please feel free to leave us message if you have any question about us and our products.

HDPE Geomembrane

PRODUCT DETAILS

PACKING AND DELIVERY

Sorry，当前栏目暂无内容!

Sorry，The current column has no content!